Difference between revisions of "Ubox firmwares"
From Spintend service and support
m (John moved page Ubox firm wares to Ubox firmwares without leaving a redirect) |
|||
| Line 1: | Line 1: | ||
This page is listing the firm wares and tools for Ubox ESCs. | This page is listing the firm wares and tools for Ubox ESCs. | ||
Ubox V1 with micro USB connector is based on VESC 75 300(R1) project, but with 3.3V MCU VDD | Ubox V1 with micro USB connector is based on VESC 75 300(R1) project, but with 3.3V MCU VDD. | ||
Ubox V1 with type-c USB connector is based on VESC 75 300 R2 project, still with 3.3V MCU | Ubox V1 with type-c USB connector is based on VESC 75 300 R2 project, still with 3.3V MCU | ||
VDD. | VDD. | ||
So V1 is need a customized firmware for correct Voltage and current measuring. This was a mistake made when we design the V1. | |||
Ubox V2 is based on VESC 75 300 R2 project, and 3.44V MCU VDD, so it is compatible with VESC original firmware, only the hardware can not support current beyond 100A per ESC. | Ubox V2 is based on VESC 75 300 R2 project, and 3.44V MCU VDD, so it is compatible with VESC original firmware, only the hardware can not support current beyond 100A per ESC. | ||
Revision as of 09:39, 29 January 2022
This page is listing the firm wares and tools for Ubox ESCs.
Ubox V1 with micro USB connector is based on VESC 75 300(R1) project, but with 3.3V MCU VDD.
Ubox V1 with type-c USB connector is based on VESC 75 300 R2 project, still with 3.3V MCU VDD.
So V1 is need a customized firmware for correct Voltage and current measuring. This was a mistake made when we design the V1.
Ubox V2 is based on VESC 75 300 R2 project, and 3.44V MCU VDD, so it is compatible with VESC original firmware, only the hardware can not support current beyond 100A per ESC.
VESC FW 5.03
Ubox V1 with micro USB connector
Ubox V1 with type-c USB connector
Ubox V2 75V
Ubox V2 100V
Ubox single 75V
