Difference between revisions of "How to upgrade the firmware of the receiver?"

From Spintend service and support
(Created page with "The wireless upgrade requires a windows PC, a Uni1 remote V2, a USB cable with a type-C connector. Install the CH340 driver, CH340 is the remote’s internal USB to UART bridge. Run the ‘CH341SER.EXE’. File:Install ch340 driver.jpg Click ‘安装’ File:Ch340 driver install succeed.jpg Click ok. Go to Device Manager, Win key + R, then type in ‘devmgmt.msc’ and click ‘ok’. File:Run device management.jpg In the Device Manager: File:Find...")
 
Line 1: Line 1:
== Prepares ==
The wireless upgrade requires a windows PC, a Uni1 remote V2, a USB cable with a type-C connector.
The wireless upgrade requires a windows PC, a Uni1 remote V2, a USB cable with a type-C connector.


== Install driver ==
Install the CH340 driver, CH340 is the remote’s internal USB to UART bridge. Run the ‘CH341SER.EXE’.
Install the CH340 driver, CH340 is the remote’s internal USB to UART bridge. Run the ‘CH341SER.EXE’.


Line 21: Line 23:
check the Ports list, to find a COM port named with ‘CH340’. The number will be used in upgrade APP.
check the Ports list, to find a COM port named with ‘CH340’. The number will be used in upgrade APP.


1.     Power on the remote, connect it to the PC with USB cable, go into setting menu->Receiver Config->Receiver Upgrade, click ENTER.
== Upgrade FW ==


1.     Run RF Upgrader V0.92.exe on windows PC.
Power on the remote, connect it to the PC with USB cable, go into setting menu->Receiver Config->Receiver Upgrade, click ENTER.
Run RF Upgrader V0.92.exe on windows PC.


[[File:Run RF upgrader.jpg]]
[[File:Run RF upgrader.jpg]]
Choose the COM port, and choose the file with ‘.binpak’ extension.
Choose the COM port, and choose the file with ‘.binpak’ extension.



Revision as of 10:40, 21 April 2022

Prepares

The wireless upgrade requires a windows PC, a Uni1 remote V2, a USB cable with a type-C connector.

Install driver

Install the CH340 driver, CH340 is the remote’s internal USB to UART bridge. Run the ‘CH341SER.EXE’.

Install ch340 driver.jpg

Click ‘安装’

Ch340 driver install succeed.jpg

Click ok.

Go to Device Manager, Win key + R, then type in ‘devmgmt.msc’ and click ‘ok’.

Run device management.jpg

In the Device Manager:

Find ch340 COMM port in device management.jpg

check the Ports list, to find a COM port named with ‘CH340’. The number will be used in upgrade APP.

Upgrade FW

Power on the remote, connect it to the PC with USB cable, go into setting menu->Receiver Config->Receiver Upgrade, click ENTER. Run RF Upgrader V0.92.exe on windows PC.

Run RF upgrader.jpg Choose the COM port, and choose the file with ‘.binpak’ extension.

Click ‘Upgrade’ or ‘Auto’ button.

Click upgrade in RF upgrader.jpg

1.     Connect Ubox with a power source, stay close with remote, then hold the power button, don’t release it, the RF Upgrader will start to download the new firmware into the receiver.

Upgrade in progress.jpg

Upgrade succeed.jpg

1.     Finished, click ok, release the power button, EXIT upgrade on the remote, then do next one. When all finished, click the Close COMM button on the RF Upgrader APP, then close the APP.