Gallery of new files

From Spintend service and support

This special page shows the last uploaded files.

Start screen on vesc tool mobile.jpg John
21:53, 30 July 2022
640 × 1,136; 106 KB
Make connection on vesc tool mobile.jpg John
21:49, 30 July 2022
640 × 1,136; 38 KB
Set app to use adc only.jpg John
15:12, 30 July 2022
1,920 × 1,165; 267 KB
Set slave ESC.jpg John
14:32, 30 July 2022
1,920 × 1,163; 270 KB
Set adc mapping.jpg John
14:27, 30 July 2022
802 × 490; 73 KB
Select adc input.jpg John
14:26, 30 July 2022
809 × 495; 46 KB
This vesc.jpg John
14:25, 30 July 2022
804 × 494; 39 KB
Input setup wizard step 1.jpg John
11:06, 30 July 2022
803 × 494; 51 KB
Go back to main esc and do setup input.jpg John
11:02, 30 July 2022
1,919 × 1,162; 264 KB
Go back to main esc.jpg John
10:52, 30 July 2022
1,919 × 1,163; 268 KB
Reset app settings.jpg John
10:49, 30 July 2022
1,920 × 1,162; 264 KB
Connect to secondary ESC.jpg John
10:47, 30 July 2022
1,920 × 1,138; 261 KB
False firmware issue.jpg John
10:33, 30 July 2022
799 × 488; 40 KB
The lights and horn output ports.jpg John
21:33, 29 July 2022
1,018 × 302; 29 KB
The brake, throttle level, and trun leftright switch.jpg John
21:32, 29 July 2022
1,327 × 599; 66 KB
The cruise, reverse, and horn function.jpg John
21:30, 29 July 2022
1,231 × 286; 33 KB
Brake throttle and turn input.jpg John
21:12, 29 July 2022
980 × 420; 39 KB
Analog brake input.jpg John
21:07, 29 July 2022
797 × 302; 15 KB
Mechanical brake input.jpg John
20:58, 29 July 2022
930 × 490; 29 KB
Uremote upgrading choose comm port.jpg John
17:44, 29 July 2022
807 × 497; 26 KB
Uremote upgrading finished.jpg John
17:42, 29 July 2022
804 × 495; 43 KB
Uremote upgrading.jpg John
17:39, 29 July 2022
803 × 494; 39 KB
Ewheel ADC adapter V2 with function port.png Amy
18:21, 22 July 2022
1,280 × 720; 592 KB
Ewheel adc adapter v2 switching dual single motor mode(quare).jpg Amy
17:58, 22 July 2022
943 × 677; 282 KB
Download the binary file from github vesc tool res.jpg John
09:22, 2 June 2022
1,622 × 425; 44 KB
Custom file mode.jpg John
09:17, 2 June 2022
1,920 × 1,161; 207 KB
Merge the two grounds with solder.jpg John
09:00, 2 June 2022
1,548 × 854; 256 KB
Scrape out the copper of adjacent grounds.jpg John
08:58, 2 June 2022
1,525 × 902; 243 KB
Disable the phase filters.jpg John
21:57, 1 June 2022
1,920 × 1,056; 148 KB
Adjust the current filter constant.jpg John
21:56, 1 June 2022
1,920 × 983; 241 KB
Set slow abs current limit to true.jpg John
21:55, 1 June 2022
1,920 × 1,019; 210 KB
Separate the TX RX from 8 pin port.jpg John
15:50, 12 May 2022
953 × 433; 33 KB
Set second esc to can mode.jpg John
22:22, 11 May 2022
1,920 × 1,164; 268 KB
Mapping adc input.jpg John
22:21, 11 May 2022
1,919 × 1,159; 288 KB
Set mode on adc page.jpg John
22:21, 11 May 2022
1,920 × 1,152; 240 KB
Set adc mode in general.jpg John
22:20, 11 May 2022
1,919 × 1,162; 263 KB
Make connection.jpg John
22:20, 11 May 2022
1,913 × 1,164; 272 KB
Ubox v2 100v function port.png Amy
18:31, 6 May 2022
1,038 × 591; 134 KB
Ubox v2 function port.png Amy
18:24, 6 May 2022
1,241 × 691; 144 KB
Bridge the two grounds with solder.jpg John
18:36, 26 April 2022
1,257 × 895; 217 KB
Scrape the coating of the pcb.jpg John
18:22, 26 April 2022
1,150 × 859; 195 KB
The analog ground of ubox v2.jpg John
18:14, 26 April 2022
1,212 × 877; 210 KB
Upgrade succeed.jpg John
10:34, 21 April 2022
554 × 343; 33 KB
Upgrade in progress.jpg John
10:33, 21 April 2022
554 × 340; 30 KB
Click upgrade in RF upgrader.jpg John
10:33, 21 April 2022
554 × 340; 24 KB
Run RF upgrader.jpg John
10:32, 21 April 2022
554 × 343; 27 KB
Find ch340 COMM port in device management.jpg John
10:31, 21 April 2022
554 × 405; 37 KB
Run device management.jpg John
10:30, 21 April 2022
454 × 266; 24 KB
Ch340 driver install succeed.jpg John
10:29, 21 April 2022
554 × 319; 27 KB
Install ch340 driver.jpg John
10:28, 21 April 2022
537 × 348; 35 KB

(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)

Retrieved from "http://175.178.7.90/index.php?title=Special:NewFiles"