Ubox firmwares

This page is listing the firm wares and tools for Ubox ESCs.

Ubox V1 with micro USB connector is based on VESC 75 300(R1) project, but with 3.3V MCU VDD.

Ubox V1 with type-c USB connector is based on VESC 75 300 R2 project, still with 3.3V MCU VDD.

VESC 75 300's VDD is 3.44V, so Ubox V1 need to customize the firmware for correct Voltage and current measuring. This is an oversight we made when designing V1.

Ubox V2 is based on VESC 75 300 R2 project, and 3.44V MCU VDD, so it is compatible with VESC original firmware, only the hardware can not support current beyond 100A per ESC.

VESC FW 5.03

Ubox V1 with micro USB connector

Ubox V1 with type-c USB connector

Ubox V2 75V

Ubox V2 100V

Ubox single 75V