The fan socket of Ubox V2 and Ubox single

From Spintend service and support
Revision as of 15:38, 2 March 2022 by John (talk | contribs)

The fan socket is implemented from VESC AUX port:

The aux port of vesc 75 300.jpg

Enable it on the VESC tool PC edition:

Set VESC AUX port.png

The MOSFET of AUX control is a low-side switch, so we connect your fan's positive wire to '12V' pin, and the negative wire to the 'FAN-', check them when the fan not work properly.

Retrieved from "http://175.178.7.90/index.php?title=The_fan_socket_of_Ubox_V2_and_Ubox_single&oldid=561"