Difference between revisions of "Improve the robustness to the abs overcurrent fault of Ubox V2 with VESC FW 5.3 and newer"
From Spintend service and support
(Created page with "Recently, we received serval report back that the Ubox V2 is easy to throw out the abs cover current fault with FW 5.3, after research and experiments, we have concluded that we can do these configurations to improve the robustness to the abs fault. == Hard ware modification: merge the analog ground and the common ground == == Set back the Slow Abs Current Limit to True == == Further, disable the phase filer after the motor's FOC setup. == == Compatibility with deve...") |
|||
Line 5: | Line 5: | ||
== Set back the Slow Abs Current Limit to True == | == Set back the Slow Abs Current Limit to True == | ||
== Further, disable the phase | == Further, disable the phase filter after the motor's FOC setup. == | ||
== Compatibility with developing FW 6.0 == | == Compatibility with developing FW 6.0 == |
Revision as of 21:21, 1 June 2022
Recently, we received serval report back that the Ubox V2 is easy to throw out the abs cover current fault with FW 5.3, after research and experiments, we have concluded that we can do these configurations to improve the robustness to the abs fault.