Difference between revisions of "E-fuse beta1 manual"
From Spintend service and support
| Line 5: | Line 5: | ||
= Feature = | = Feature = | ||
* Aluminum power stage | * Aluminum substrate power stage with stacked logic board. | ||
*High side N-MOSFETS, 100V 300A x 3. | *High side N-MOSFETS, 100V 300A x 3. | ||
*Low side | *Low side shunts for current sample, 0.5mΩ x 5. | ||
* 15A, 30A, 60A, 120A, 240A, 300A configurable protecting current, beyond 120A is yet testing. | * 15A, 30A, 60A, 120A, 180A, 240A, 300A configurable protecting current, beyond 120A is yet testing. | ||
* 80V max battery voltage, with 20V MOSFETS margin, 100V can be achieve by change the MOSFET. | * 80V max battery voltage, with 20V MOSFETS margin, 100V can be achieve by change the MOSFET. | ||
* Anti-spark. | * Anti-spark. | ||
Revision as of 17:20, 31 December 2022
E-fuse is to provide a electronic power switch with overcurrent protection and anti-sparking function.
The physical fuse is simple and reliable, but reacts too slow. For example, out 120A fuse, when current is 240A, it will take 1 minute to blow, this is some times too late. And they are lack of flexibility.
Feature
- Aluminum substrate power stage with stacked logic board.
- High side N-MOSFETS, 100V 300A x 3.
- Low side shunts for current sample, 0.5mΩ x 5.
- 15A, 30A, 60A, 120A, 180A, 240A, 300A configurable protecting current, beyond 120A is yet testing.
- 80V max battery voltage, with 20V MOSFETS margin, 100V can be achieve by change the MOSFET.
- Anti-spark.
- Power switch, support momentary/latching button and ignite key.
- Roll to power on, can be set off by a switch.
- Auto power off after 20 minutes, when ESC is idle, also can be set off by a switch.
- Less than 100uA shut off current.
- Size:
