Main Page

From Spintend service and support
Revision as of 21:27, 10 August 2022 by John (talk | contribs) (→‎Manuals)

Hi, this is John, welcome to our service and support wiki.

We are a start-up company and lack funds and manpower, so I set up this wiki to help me update and maintain information and knowledge about Spintend products at any time. I will put our product manuals, FAQs, how to, and some other articles here. Due to my limited energy, this wiki will not quit the perfect content at one time, I will try my best. As long as I have a little time, I will update it. Thank you.

Our selling web site: http://www.spintend.com.

Introduces

Introduce our Ubox V2

Introduce our Remote V2

Introduce our Adapter V2

Introduce our Ubox single 100V 100A

Manuals

Ubox V2 75V manual

Ubox V2 100V manual

Uremote V2 manual

Adapter V2 manual

Spiny manual

How to...

How to setup a 4WD with Ubox V1

How to setup a 4WD with Ubox V2

How to build a 2/4WD switch-able board with ubox v2

How to diagnosis Ubox

Config VESC UART control mode

How to wire my own power button to the ubox?

How to upgrade the firmware of the receiver?

How to upgrade the firmware of the Uremote V2?

FAQ

Ubox V2 FAQs

General FAQs


Articles

Notes of VESC FW 5.3

The internal UART and Bluetooth(NRF) matrixes of Ubox

The setting menu of Uremote

The power button of Ubox

The CAN-IN and IGNITE socket of Ubox V2

Tips for the VESC FW update and SWD program mode

The priority of power-on input of Ubox V2

The fan socket of Ubox V2 and Ubox single

The NRF IO of Ubox single

The Uremote and it's standard receiver and Ubox internal receiver

The Ubox family and their firmware

Improve the robustness to the abs overcurrent fault of Ubox V2 with VESC FW 5.3 and newer

Firmwares

[Ubox firmwares]

Uremote and receiver firmwares


Notes